Home > Toilet Fill Valve > Toilet Tank Fill Valve

Toilet Tank Fill Valve

  • High quailty Toilet Fill Valve
  • Toilet Ball Cocks & ball parts fill valve
  • Toilet Tank Fill Valve
  • Toilet Cistern Fill Valve
  • Water saving toilet fill valve
  • Ballcocks
  • Side Toilet Fill Valve
  • Side Inlet Toilet Fill Valve
  • Toilet Side Fill Valve
  • Anti-siphon height-adjustable fill valve
  • Side-in fill valve with adjustable float
  • Bottom-in Fill Valve
  • Adjustable anti-siphon fill valve(linked two-piece float)
  • Height-adjustable fill valve with Refill Mechanism
  • Adjustable Anti-siphon fill valve
  • Fill valve with adjustable float
  • Noise-free fill valve with adjustable float
  • Side-in fill valve with adjustable float
  • Super noise-free fill valve with adjustable float
  • Anti-siphon fill valve with adjustable float
  • Toilet fill valve filter
  • Siphon Fill Valve
  • WATER CONTROL VALVES

Product Abstract:

Toilet Tank Fill Valve is very silent during the water coming.it is very suitable to install on bed room for children or old man.


Product Description

Toilet Tank Fill Valve

toilet tank fill valve

toilet tank fill valve

toilet tank fill valve

toilet tank fill valve

Toilet Tank Fill Valve product features:

1, Toilet Tank Fill Valve is very east to install,it have hex nut can be operated without tool.
2, it is very silent during filling water
3, it is very easy to installed and to adjust the water height.
4, quiet operation.

installation

1,turn off the silent toilet fill valve water supply,flush the toilet and use a sponge to remove  any water that left in the tank
2,remove water supply line from old fill valve
3,Unscrew silent toilet fill valve mounting nut located under toilet tank and remove old fill valve
4,Place the shank gasket onto the treaded shank of the new silent toilet fill valve,and position toilet fill valve into hole inside the toilet tank,thread mounting nut onto shank of valve and hand tighten only.over tighting can cause damanage to  fill valve or crack toilet.
5,inspect supply line and replace old washer and nut if needed.if the supply line washer and nut included in the kit are not an  exact match to what is on your supply line,you will need to buy the correct size washer and nut ,reconect the water supply line to the silent toilet fill valve and hand tighten supply line nut.
6,attach refill tube clip to refill tube.attach refill tube clip to overflow tube and push other end of tube over stem on silent toilet fill valve
7, the silent toilet fill valve is present to fill a conventional size toilet tank ,to adjust the water level ,turn the adjusting knob clockwise to raise the water level or counter clockwise to lower the water level ,one full turn of the adjustment knob will change the water level approximately 2 inchs.

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:

    captcha

Contact Us