Home > News > Install the Dual Flush Converter

News

Install the Dual Flush Converter
2013-10-24 23:52:51
 

Install the Dual Flush Converter

 

It is a easy part of the whole conversion. You can follow the instructions just as easily as I can write them so I’ll just tell you that I had the converter installed and I turned the water on. It will only water in the way, the water still running. I carefully looked at, what also can't see clearly but I can feel a gap down in the blue.I took the converter shell on the back base (each row of the manual) and look down. I can easily see the blue silica gel gasket is not properly installed to flush valve. I will sit on it and try again. Success.

Finally, I height adjustment, adjustment and water washing.

In short, this is not a couple of easy conversion problems.

 

In short, this is not a couple of easy conversion problems.

I do not care for the old rubber sponge pad rather than a new. The result is not appropriate, a bad leak, I can, take water return tank. Initially, tank not easily. I work too hard, it also missed, because I lost the old gasket to let it go out of my sight.

The replacement of water pipes are no leakage. I think the old metal tube is extended upward, which in turn causes the valve does not work. This led to the closure of water in the house.

In short, I'm glad I did, because I know it will help save water and in my purse put some green.


Previous   [Return Home] [Print] [Go Back]   Next

Contact Us