Dual Flush Converter Kit B4210

The Quick-Fit Dual Flush Converter Kit

Only 3 step, easy diY

handle and buttom optional

Installation is as easy as 1, 2, 3

1 Remove the rubber flapper

2 Slide the new valve into place

3 Tighten the wing nut

A fast and easy water tight seal

Because a dual fiush handle needs to move in two directions and it's being installed on a toilet

that was designed for a handle that moves in one direction, there isnt a lways enough room for a

handle to swing both ways. ""Different toilets require different handle solutions

The Quick-Fit addresses these issues by offering a handle that works two ways, as well as an

attractive push button all in one kit

An over sized flush body with a sloped tapered opening emptying into the existing flush base insures

a rapid evacuation of water during a flush cycle that translates into a better flush with less water

What toilets will the Quick-Fit work on?

7 gallon,

5 gallon

3. 5 gallon,

1.6 gallon, and

1.28 gallon toilets

older and newer style 2 piece toilets

older and newer style 1 piece toilets

All Sloped or flat 2 to 2-1/2

Douglas style Flapper Valves

The quick-Fit Dual Flush Converter Kit

Only 3 step, easy DIY

Turn off water-Flush toilet-Remove lever flapper

Twist and pull upper housing from base.

Two methods of gasket installation for oblique or flat bases

1)Slide base down overflow tube.

2)Insert the plug in the fixer if the overflow tube is smal

If the overflow tube is large enough, plug is unnecessary.

Press down the base and screw the nut tightly.

Attach the upper housing and rotate it to lock in place

1)Attach button in switch hole.

2)Screw button assembly.

3)Firmly install control box.

Easy to adjust flush volume.